top of page


The Reflex VF2 TDR products is ideal for the measurement of liquids, powders and granules to a range of 131 Ft.  Unaffected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant or coating of the probe, the VF Series can measure virtually any product in either Direct, Automatic or TBF mode utilizing any one of it’s seven probe types.


The VF2 TDR transmits low-intensity electromagnetic pulses of approximately one nano second width along a rigid or flexible conductor. These pulses move at the speed of light and when the pulses reach the surface of the product to be measured, the pulses are reflected back to the signal convertor.


The device then measures the time from when the pulse was transmitted to when it is received. This is then divided by two as this is the time equivalent to the distance from the reference point of the device to the surface of the product. The time value is then converted into an output current of 4...20mA. The VF2 is fitted with new DPR advanced software for dynamic parasite rejection which automatically removes false signals and improves stability and accuracy of the measured signal.


Universal technology

Multiple housings

Remote display available

SIL 2 safety level

Integral dispplay and programmer

Two-wire loop powered

Parasite rejection software

Corrosion resistant

Small process connections

ATEX options

Technical Data

Measuring Range: 0 - 40m

Accuracy: +/- 3mm option

Maximum Temperature: 300ºC

ATEX option: Yes

bottom of page